VID_Pen

Control System for Synchronuos Homopolar Motor Drives from 315 to 1250 kW

Synchronuos Homopolar Motor Drives (SHM) from 315 to 1250 kW is the series of the low-voltage drives based on synchronuos homopolar machine. This drive was installed as a replacement of medium-voltage drive. The motor is made of several insulated sections and can operate in case of fault in any of them. This drive can be fed from two different power networks and continue its operation in case of failure in one of them. Today there are 14 drives in operation at several regional heat plants (RHP) of Moscow. They are drives of smoke exhausters, fans and pumps.

MORE Information


train

Control System for Auxiliary Power Supply APS-24 for Subway Trains

The embedded control system for auxiliary power supply APS-24 is based on novel dual-core microcontroller from Texas Instruments. This power converter supplies low voltage network of the subway train with 80 VDC, charges the onboard battery, and runs motor-compressor unit for pneumatic system. The primary supply is from the DC traction grid with the range of the input voltages from 550 to 1100 VDC.

 

more information


sgu

Encoderless Control System for 2-phase Switched-Reluctance Drive of Hot Water Circulating Pumps

This project was performed for Moscow Joint Energy Company. One thousand of installations in Moscow for hot water circulating pumps at heat distributon stations. The designed drive with its control system can operate in encodeless mode over its entire speed range.

 

MORE INFORMATION


mk19_1

Induction motor control system with auto-catch function for OAO “Izhevskiy Radiozavod” frequency converter

According to the order of OAO “Izhevskiy Radiozavod” OOO “NPF VECTOR” has developed a modern control system and controller MK19.1 for the frequency converter of the customer, as well as software for controlling the induction motor.

 

MORE INFORMATION


Контроллер проверочной аппаратуры (КПА)Control and test equipment for specialized three-phase synchronous motors

Within the framework of the project, a controller of verification equipment (CVE) for three-phase synchronous motors with electromagnetic speed reduction (SMEsR) was manufactured.

 

 

MORE INFORMATION


dsc01055

“TPS-2х4500” power supply control system for DC electric arc furnace SMF-2

Within the framework of the project, the “TPS-2х4500” power supply control system was implemented for a DC arc furnace with a capacity of 2 tons. 1.8MW power supply, arc current up to 9kA, arc voltage up to 500V.

Customer: OOO “VKM-Stal”, Saransk.

MORE INFORMATION


Вебсайт со схемой освещения здания

Automation and dispatching of the building lighting system in the city of Orel

As a part of the work on lighting automation and dispatching of the building in Orel, a set of “Smart House” equipment was used. The monitoring and control system of lighting equipment displays information on the status of switching equipment in a graphic form. There is the possibility to control the lighting load. The state and time of the last change is also displayed.

 

MORE INFORMATION


Интерактивная схема установки АСУ

Automation and dispatching of the unit for modification of polyethers

Automatic control system (ACS) was developed for the modernization of the unit for modification of polyethers of OOO “TIRIT”. The tasks of the work are automation and dispatching of the existing equipment operation. The ACS kit consisted of an ACS panel, as well as a software shell using Internet technologies.

 

MORE INFORMATION


1

Remote monitoring of the switchboards state

Within the framework of this project, a remote monitoring system was implemented for the switchboard (power input devices of the enterprise). The device consists of a microcontroller that collects information, and a computer that displays it. The system allows to keep a log of system state changes, to track necessary time points, to obtain the required statistical information.

 

MORE INFORMATION


MIRN

Electrical kit for infrared PCB soldering furnaces

For its own needs, R&D Company “Vector” LLC has created equipment for soldering smd components in an infrared furnace. The equipment allows you to select a heating profile and stabilizes the temperature at the target point with an accuracy of 3 degrees. Using this equipment, pre-production and prototype controllers are manufactured.

ПОДРОБНЕЕ


model

Испытательный стенд и тестовое ПО для макета К1921ВК01Т: 32-разрядного микроконтроллера на базе ядра ARM Cortex-M4F специализированного под задачи управления электроприводом

В рамках работы ООО «НПП «Цифровые решения» по разработке совместно с ООО “НИИЭТ” СБИС 32-разрядного микроконтроллера на базе ядра ARM Cortex-M4F наша компания выполнила работу по тестированию разрабатываемой специализированной периферии. С помощью испытательного комплекта была произведена оценка работоспособности специализированной периферии для управления двигателями, а также были  выявлены ошибки и недочеты.

Подробнее


50

Научно-исследовательская работа для ООО “НПП”Цикл плюс” по созданию системы управления для высоковольтного 3-х уровнего инвертора

В рамках работы проводилась разработка алгоритмов для цифровой системы управления трехуровневым инвертором напряжения для новой серии преобразователей частоты ООО «НПП «ЦИКЛ ПЛЮС».

 

Подробнее


Лаборатория "Энергосберегающий электропривод" учебного центра "МОЭК-МЭИ"

Лабораторные стенды, методики и программное обеспечение для преобразователей частоты лаборатории электропривода Кафедры Автоматизированного Электропривода (АЭП) ФГБОУВО НИУ “МЭИ”

В рамках работы специалистами ООО «НПФ ВЕКТОР» было реализовано уникальное ПО, которое позволило реализовать задуманные методические разработки кафедры АЭП, что привело к возможности рассматривать современные электрические преобразователи не в качестве «черного ящика», приобретенного у стороннего производителя, а как открытый объект исследования, в мельчайших деталях доступный студентам для изучения.

Подробнее


Элементы шкафа преобразователя ВИП-630 номинальной мощностью 800 кВт

Система управления вентильно-индукторного электропривода большой мощности для обогатительных фабрик АК “Алроса”

В рамках данной работы была разработана модульная система управления вентильно-индукторными электродвигателями (ВИД) мощностью 630, 1250 и 1600 кВт для приводов мельниц на обогатительных фабриках АК «АЛРОСА».

 

Подробнее


20150317_150641

Переносная система диагностирования изоляции электрических автотранспортных средств с возможностью локализации места пробоя

Переносная система контроля изоляции (СКИ) предназначена для оперативной проверки качества изоляции кабельной проводки и обнаружения места утечки. Работа СКИ основана на оценке тока утечки, протекающего через проверяемый провод в различных по его длине точках.

 

Подробнее


Система управления силовым преобразователем для стабилизации напряжения генератора переменной скорости вращения

Преобразователь для стабилизации напряжения и частоты генератора переменной частоты вращения, приводимого от авиационного двигателя. Разрабатывается с целью модернизации наиболее распространенной системы электроснабжения воздушных судов переменного тока постоянной частоты 400 Гц.

ПОДРОБНЕЕ


Блок регулирования напряжения для автономной системы электроснабжения пассажирских вагонов поездов дальнего следования

Блок регулирования напряжения (БРН) предназначен для стабилизации напряжения и повышения качества электроснабжения вагонов в поездах дальнего следования, улучшения условий работы аккумуляторных батарей и продления их срока службы.

ПОДРОБНЕЕ


СГУ3 + Универсал 7.5

Станции группового управления для систем горячего/холодного водоснабжения

Станция группового управления (СГУ) предназначена для согласованного управления одним преобразователем частоты (ПЧ) и несколькими насосами на базе асинхронных электродвигателей в системах регулирования давления горячей/холодной воды. Разработана серия таких станций на число насосов от 2 до 6.

Подробнее